Optotronics 532nm Green Laser Systems

532nm Green Laser Systems

532nm DPSS green laser systems with output power from 100mW to 8000mW or more. Their compact design, high reliability and ease of use make them an ideal choice for corporate and university research laboratories.

(Please allow 3-4 weeks for delivery on these systems)

Applications:

• Spectroscopy
• Holography
• Fluorescence excitation
• Semiconductor surface inspection
• Microscopy and diagnostic imaging
• DNA sequencing and analysis

• Fully adjustable output power from 0mW up to the maximum rated output of each model.

• High stability output of within less than 5% over 8 hours.

• Closed loop TEC active cooling ensures stable output over long periods.

• LED display of laser driver output current.

• Exceptional beam quality over the complete working life of the laser.

• Does not require high power or multi-phase power circuits.

• Complies with federal regulations (21 CFR 1040.10, 1040.11)

• Warranty: 12 months

Model	VA-I-xxx-532		VA-II-xxx-532	VA-III-xxxx-532
Wavelength (nm)	532
Output Power (mW)	100-300		400-2000	3000-5000
Working Mode	Continuous Wave (non-pulsed)
Beam Mode	Transverse	TEM₀₀
	Longitude	Multi-longitude
Spectral line width (nm)	<0.1
Polarization	Line polarization
Polarization Ratio	>100:1
Beam Quality (M2 factor)	<1.2
Far-Field Divergence (1/e²)	1.2ï¿½0.2 mrad		1.2-2.0 mrad	3.0ï¿½0.2 mrad
Beam Diameter at aperture (mm)	1.2ï¿½0.2		2.0-3.0	4.0ï¿½0.2
Beam roundness	>90%
Power stability(RMS)	<5% over 8 hours (ambient ï¿½2ï¿½C)
Aperture Position (mm)	25		20	100
Dimensions of Laser Head (mm)	136 x 50 x 45		180 x 62 x 62	320 x120 x105
Integrated Driver Model	VD-II		VD-III	VD-IV
External Modulation	5V TTL / 5V Analog
Modulating Frequency	30KHz TTL / 10KHz Analog
Cooling system	TEC		TEC	TEC + Air cooled
Warm-up time (minutes)	<15
Operation Temperature	18°C to 30°C
Power Requirements	110-120V 60hz (15A) / 220-240V 50hz (10A)
Expected Lifetime (hours)	>10000
Regulatory certification	Complies with CDRH (21 CFR 1040.10-1040.11) Class IIIb & IV
Warranty	1 year

Click on any photo to see a larger version

$Measuring output power on the VA-I-100-532nm 100mW laser system.\nThis unit actually output ~ 120mW, but was adjusted to less than it's maximum output power.$

• Full laser certification on your 532nm laser system. More Details.

• Laser glasses, 5% discount on a pair when ordered with any 532nm green laser system.